Total Video Inputs
ATEM Television Studio HD is the first production switcher designed for both broadcasters and AV professionals. It includes 4 SDI and 4 HDMI inputs with re-sync on all inputs so you can use it with broadcast or consumer cameras. ATEM Television Studio HD is packed with high end features and is perfect for live production, episodic television programming, web shows, AV or even live coverage of gaming competitions! Simply plug in cameras, game consoles or computers and start switching live!
270Mb, 1.5G, 3G.
2 x XLR.
1 x Headphone.
4 x 10-bit SD/HD switchable. 2 channel embedded audio.
4 x HDMI type A, 10-bit SD/HD switchable. 2 channel embedded audio.
Tri-Sync or Black Burst.
On all 8 inputs.
5 x 10-bit SD/HD switchable.
2 Ch embedded into SDI output.
525i59.94 NTSC 4:3 or 16:9, 625i50 PAL 4:3 or 16:9
1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p50, 1080p59.94,
SMPTE 259M, 292M and 424M.
720 x 480i 59.94Hz, 720 x 576i 50Hz, 1280 x 720p 59.94Hz 50Hz and 1920 x 1080p 23.98, 24, 25, 29.97,30, 50, 59.94 and 1920 x1080i 50 and 59.94Hz 60Hz.
Hardware based real time.
10 input x 2 channel mixer.
Level and Peak metering.
Master gain control. Headphone output level control with separate mix of Program, Talkback and Sidetone.
Built in, uses aviation headset.
Yes, on 4 camera PGM outputs.
Minimum monitor resolution of 1366 x 768.
1 x 10
8 routable and 2 fixed for Program and Preview.
Red for program and green for preview indication.
Added via ethernet connection to Blackmagic Design GPI and Tally Interface product. (Not included.)
1 x 10 Views.
2, with non volatile flash memory.
Fill and key for each Media Player.
20 with fill and key.
PNG, TGA, BMP, GIF, JPEG and TIFF.
Built in control panel. Software control panel included. Supports optional broadcast panel.
Ethernet supports 10/100/1000 BaseT. Allows direct connection between panel and chassis, or via network. Also used for updating the software.
Compatible with ATEM 1 M/E Advanced Panel, ATEM 2 M/E Advanced Panel and ATEM 4 M/E Advanced Panel. Includes ATEM Software Control Panel.
ATEM Software Control Panel included free for Mac 10.10 Yosemite, Mac 10.11 El Capitan or later and Windows 8.1 64-bit or Windows 10 64‑bit.
Using USB connection directly connected to Mac or Windows computers. Includes ATEM Setup Utility
Set via ATEM Software Control Panel, excluding ATEM chassis IP address which is set via the ATEM Setup Utility connected via USB to chassis.
1 x internal 100 – 240V AC
5° C to 40° C (41° ‑ 104°F)
-10° to 60° C (14° to 140° F)
0% to 90% non‑condensing
ATEM Television Studio HD
SD card with software and manual
12 Months Limited Manufacturer's Warranty.
Warranty details can be found in the ATEM Switchers Operation Manual in the support page at www.blackmagicdesign.com.